Wholesale China Rubbler O-Ring Factories Pricelist - electric thermal actuator H9001 – Xushi Detail:
Type:Floor Heating Parts
Floor Heating Part Type:electric thermal actuator
Outer shell material:PC
Control components (T):Electric heating wax sensor
The thrust F and the direction:110N > F ≥ 80N, direction: upward (NC) or downward (NO)
Connecting sleeve:M30 x 1.5mm
Ambient temperature (X):-5 ~ 60 ℃
First running time:3 min
Total stroke:3 mm
Protection class:IP54
Consumption:2 Watt
Power wiring:1.00 meter with two core
parameter
Technical Parameter | |
Voltage | 230V (220V) 24V |
Status | NC |
Power Consumption | 2VA |
Thrust | 110N |
Stroke | 3mm |
Running time | 3-5min |
Connection size | M30*1.5mm |
Ambient temperature | From -5degree to 60degree |
Cable Length | 1000mm |
Protective housing | IP54 |
process
Raw Material, The mould, Injection molding, Detection, The installation, Testing, The finished product, Warehouse, shipping.
Thermal Actuator
Used in conjuction with room thermostats and all our wiring centres. Actuators open or close ports on the manifold when there is a demand from a thermostat.
The thermal actuator is used with electrical on/off-controls to activate several types of valves and floor heating manifolds. The actuator is equipped with a visual position indicator to show the open or closed position of the valve. Our actuators can be provided with connections for for valves with M30x1.5 connection.Actuators are made for either 24 V (SELV) , 110V, 230 V or 240 V supply in both normally closed (NC) or normally open (NO) versions (valve positions with no supply voltage to the actuator).
Product detail pictures:
Related Product Guide:
We normally follow the basic principle "Quality Initial, Prestige Supreme". We've been fully committed to offering our consumers with competitively priced good quality merchandise, prompt delivery and professional support for Wholesale China Rubbler O-Ring Factories Pricelist - electric thermal actuator H9001 – Xushi, The product will supply to all over the world, such as: Serbia, Thailand, Cannes, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By John biddlestone from Maldives - 2017.09.30 16:36
We feel easy to cooperate with this company, the supplier is very responsible, thanks.There will be more in-depth cooperation.
By Tony from Berlin - 2017.04.18 16:45