Feature:Easy Operating
Diameter:5 cm
After-sales Service Provided:Engineers available to service machinery overseas
Name:hose fitting joiner
Application:Medium Land Irrigation System
Color:Black
Packaging:plastic bag
Certification:ISO9001
Model:16mm
Advantage:Long Service Life
Surface:Smooth
parameter
|
Body: |
PP or PE |
|
Cap: |
PP or PE |
|
Size: |
/ |
|
End connector: |
/ |
|
Standards: |
/ |
|
Characteristic: |
Light Environmental Durable |
|
Media: |
water corrosive liquid |
|
Use: |
Agriculture irrigation Garden Construction Petroleum chemical industry ETC. |
process
Raw Material, The mould, Injection molding, Detection, The installation, Testing, The finished product, Warehouse, shipping.
features
(PE)Polyethylene is the most productive variety in the plastics industry. Polyethylene is an opaque or translucent, light-weight crystalline plastic, with excellent low temperature resistance (the lowest use temperature can reach -70 ~ -100 ℃), its characteristic is that it feels like wax, and its surface density is small and easy to be scratched. , But it has good elasticity, good electrical insulation, good chemical stability, and can withstand most acid and alkali corrosion, but it is not heat resistant. Polyethylene is suitable for processing by injection molding, blow molding, extrusion molding, etc.
(PP)Polypropylene is a thermoplastic obtained by polymerization of propylene. It is usually a colorless, translucent solid, odorless and non-toxic, with a density of 0.90 ~ 0.919 g/cm3. It is the lightest general-purpose plastic and its surface density is relatively small. It is easy to be scratched. Its outstanding advantage is that it has the characteristics of resistance to boiling in water, corrosion resistance, strength, rigidity and transparency are better than polyethylene. The disadvantage is that it has poor low-temperature impact resistance and is easy to age. Polypropylene is suitable for blow molding and injection molding
